Godrej Ritz Bio With I Buzz Home Locker

A : Black

A : 30 litres home lockers have enough space to store upto 2 jewellery boxes and other valuables like wallets, watches , ring boxes and documents.

A : No. these safes are not certified fire resistant. We have a range of lockers which are certified fire resistant and can withstand fire upto 2 hours. Please check the safire and centiguard range of lockers for fire resistancy.

A : Yes. The safe is divided into two compartments by a shelf.

A : No, you cannot delete a selected fingerprint in a biometric locker. All the fingerprints will be deleted if you delete a selected fingerprint.

A : Open the safe. Open battery cover. Remove any one battery. Long press initialization button behind the door. Insert the battery; keep pressed initialization key until shooting bolts come out.

A : To register a fingerprint, follow these steps:- Open the locker. Press & release initialization button behind the door. Place 1st finger on sensor till you hear 3 beeps. Repeat process 2 & 3 for remaining finger enrollment. Close the locker.

A : Close the door and press the button next to the fingerprint sensor. A beep will be heard and the green LED will flash once. The bolts extend fully followed by a short beep; this indicates that the locker is closed.

A : Biometric lockers ensure the safety of your valuables at your fingertips. To open the locker, press the button next to fingerprint sensor, a beep is heard. Place the registered finger on the sensor when the green LED fingerprint reader lights up. Please note: In Factory default condition, any fingerprint can open the safe.

A : You can use the mechanical override key available with the locker to access the locker in case fingerprint sensor is not working. If you have lost the mechanical override key, please call on 1800-209-9955 for help.

A : If the red LED flashes 3 times with a sound, this means that the batteries need to be replaced.

A : The green LED (2 beeps) indicates successful authorization while the red LED (3 beeps) indicates failed authorization.

A : If the batteries are weak or dead, the locker can be opened by using the emergency override keys. Once you have opened the locker, the internal batteries can be changed.

A : Open the locker using your personal code. If the batteries are dead, use the emergency override key. Remove the battery cover on the back panel by unscrewing the Philips screw and replace the batteries.

A : Your safe always works on battery therefore it has an advanced battery monitoring system which continuously monitors the battery voltage When Red LED flashes 3 times with a melody, it’s time to change the batteries.

A : No, the override keys cannot be duplicated manually. Every locker is equipped with a unique key design which only works in the locker with which it is supplied.

A : Yes. The locker can be bolted from the bottom as well as the back into a cupboard or onto the wall.

A : No. These safes are not certified fire resistant. We have a range of lockers which are certified fire resistant and can withstand fire upto 2 hours. Please check the safire and centiguard range of lockers for fire resistancy.

A : Yes. Ritz range of lockers come with an in-built alarm system that sets off an alarm immediately when it detects any kind of intrusion.

A : These safes are 100 times stronger than your wooden cupboard