A : These safes are 10 times stronger than your wooden cupboard
A : No. You can check our Ritz range of lockers which come with an inbuilt alarm system
A : No. These safes are not certified fire resistant. We have a range of lockers which are certified fire resistant and can withstand fire upto 2 hours. Please check the safire and centiguard range of lockers for fire resistancy.
A : Yes. The locker can be bolted from the bottom as well as the back into a cupboard or onto the wall.
A : No, the override keys cannot be duplicated manually. Every locker is equipped with a unique key design which only works in the locker with which it is supplied.
A : Your safe always works on battery therefore it has an advanced battery monitoring system which continuously monitors the battery voltage When Red LED flashes 3 times with a melody, it’s time to change the batteries..
A : Open the locker using your personal code. If the batteries are dead, use the emergency override key. Remove the battery cover on the back panel by unscrewing the Philips screw and replace the batteries.
A : If the batteries are weak or dead, the locker can be opened by using the emergency override keys. Once you have opened the locker, the internal batteries can be changed.
A : The green LED (2 beeps) indicates successful authorization while the red LED (3 beeps) indicates failed authorization.
A : If the red LED flashes 3 times with a sound, this means that the batteries need to be replaced.
A : You can use the mechanical override key available with the locker to access the locker in case fingerprint sensor is not working
A : Biometric lockers ensure the safety of your valuables at your fingertips. To open the locker, press the button next to fingerprint sensor, a beep is heard. Place the registered finger on the sensor when the green LED fingerprint reader lights up. Please note: In Factory default condition, any fingerprint can open the safe.
A : Close the door and press the button next to the fingerprint sensor. A beep will be heard and the green LED will flash once. The bolts extend fully followed by a short beep; this indicates that the locker is closed.
A : To register a fingerprint, follow these steps:- Open the locker. Press reset button located at back of the door.Power indicator LED & OK indicator LED will light up along with one short beep &one long beep.Place the finger ypu need to register.Ok indicator LED will light up follower by a long beep indicates finger is registered sucessfully.
A : Open the safe.press the reset button for around 5 seconds.The power indicator will light up.After 5 seconds OK indicator LED and NO indicator LED will light up alternatively.Release the Reset button after a long beep is heard.Fingerprint have been deleted successfully.
A : No, you cannot delete a selected fingerprint in a biometric locker. All the fingerprints will be deleted if you delete a selected fingerprint.
A : No. These safes not have internal shelves
A : No. These safes are not certified fire resistant. We have a range of lockers which are certified fire resistant and can withstand fire upto 2 hours. Please check the Safire and Centiguard range of lockers for fire resistancy.
A : 8 litres home lockers are generally suitable for small items such as wallets, small jewellery items like rings and small necklaces and watches, etc.
A : Ivory is off-white in colour
No Reviews Available.
Copyright © 2025. godrejsecure.com All Rights Reserved
Site hosted and managed by Brandbuddiez Technologies Pvt. Ltd.